See llms.txt for all machine-readable content.

MQTT and Paymo integration

Save yourself the work of writing custom integrations for MQTT and Paymo and use n8n instead. Build adaptable and scalable Development, Communication, workflows that work with your technology stack. All within a building experience you will love.

How to connect MQTT and Paymo

Create a new workflow and add the first step

In n8n, click the "Add workflow" button in the Workflows tab to create a new workflow. Add the starting point – a trigger on when your workflow should run: an app event, a schedule, a webhook call, another workflow, an AI chat, or a manual trigger. Sometimes, the HTTP Request node might already serve as your starting point.

MQTT and Paymo integration: Create a new workflow and add the first step

IOT device control with MQTT and webhook

. IOT device control with MQTT and webhook This workflow is for users wanting a practical example of how to control IOT systems using the MQTT protocol in an an n8n environment. The template provides typical n8n MQTT and Webhook node implementation and configuration settings necessary to set IOT device inputs and outputs. How it works A webpage with IOT control 'on and 'off' buttons is presented to the user. When a button is selected on the webpage the value is sent via a webhook to trigger the active workflow. The workflow set node then prepares the received value into a message payload. It then passes the message to the MQTT node for publishing the topic with the payload to a cloud based MQTT broker. A remote ESP32 micro-controller subscribes to the broker and reads the payload contained in the topic. The ESP32 will then toggle the GPIO pin depending on the topic payload value. The IOT control webpage The webpage is a simple HTML page containing the clickable 'on' and 'off' buttons. It also has the get webhook URL that sends the selected value to the n8n workflow in this case running locally. The URL webhook format is http://localhost:5678/webhook/pin-control?value=action The webpage code IOT-control.html IOT device The IOT device is an ESP32 micro-controller running on a remote network. To keep it simple GPIO2 is selected as the control output. In this case when the received value is "on" GPIO2 goes high a led will turn on in the ESP32. It will go off when the received value is "off". The program for the ESP32 IOT control is 'main.py' . You will require a micropython interpreter to be uploaded to the ESP32 for the program to run automatically. The code can be easily edited and modified to accommodate any further attached IOT devices. The ESP32 main.py code main.py How to customise this workflow to your needs ESP32 You will need a working ESP32 installed with a micro-python interpreter. The code main.py is provided. The main.py program can loaded and edited with a python IDE. I used Thonny for this example. Use a free MQTT broker to get started. I used "broker.emqx.io" in the code. IOT Control Webpage The webpage contains HTML and can be easily edit to enhance functionality. The embedded webhook is configured for n8n production mode. http://localhost:5678/webhook/pin-control?value=action If you want to run the page in test mode you will use the following URL. http://localhost:5678/webhook-test/pin-control?value=action n8n workflow. The workflow is a good demonstration of how to control IOT devices using n8n. Following these steps will give a good insight for microcontroller automation.

Build your own MQTT and Paymo integration

Create custom MQTT and Paymo workflows by choosing triggers and actions. Nodes come with global operations and settings, as well as app-specific parameters that can be configured. You can also use the HTTP Request node to query data from any app or service with a REST API.

Supported API Endpoints for Paymo

To set up Paymo integration, add the HTTP Request node to your workflow canvas and authenticate it using a generic authentication method. The HTTP Request node makes custom API calls to Paymo to query the data you need using the API endpoint URLs you provide.

See the example here

These API endpoints were generated using n8n

n8n AI workflow transforms web scraping into an intelligent, AI-powered knowledge extraction system that uses vector embeddings to semantically analyze, chunk, store, and retrieve the most relevant API documentation from web pages. Remember to check the Paymo official documentation to get a full list of all API endpoints and verify the scraped ones!

MQTT and Paymo integration details

MQTT

MQTT

MQTT is an OASIS standard messaging protocol for the Internet of Things (IoT). It is intended to link faraway devices with a tiny code footprint and low network traffic by acting as a very lightweight publish/subscribe message transport.

Paymo

Paymo

Paymo is a project management tool that helps businesses track time, manage tasks, and collaborate effortlessly. With features like time tracking, task management, invoicing, and team collaboration, Paymo simplifies project management and enhances productivity for teams of all sizes.

Other integrations with MQTT and Paymo

Save engineering resources

Reduce time spent on customer integrations, engineer faster POCs, keep your customer-specific functionality separate from product all without having to code.

Learn more

FAQ about MQTT integrations

Looking to integrate Slack and VirusTotal in your company?

Three colleagues talking around laptops at a shared desk

Trusted by teams building smarter workflows.

Why

Why use n8n to integrate MQTT with Paymo

Handle branching, merging and iteration easily. Pause your workflow to wait for external events.

Re-run single steps to test changes in no time. And pin your data to avoid generating trigger events every time you execute.

Your data is displayed alongside your settings, making edge cases easy to track down.

Use 1000+ workflow templates available from our core team and our community.

Copy and paste, easily import and export workflows.

Simple enough to 
understand + sophisticated 
enough to ship

Man in a brown jacket working at his desk by a window