Mailersend and Missive integration
How to connect Mailersend and Missive
Create a new workflow and add the first step
In n8n, click the "Add workflow" button in the Workflows tab to create a new workflow. Add the starting point – a trigger on when your workflow should run: an app event, a schedule, a webhook call, another workflow, an AI chat, or a manual trigger. Sometimes, the HTTP Request node might already serve as your starting point.
Build your own Mailersend and Missive integration
Create custom Mailersend and Missive workflows by choosing triggers and actions. Nodes come with global operations and settings, as well as app-specific parameters that can be configured. You can also use the HTTP Request node to query data from any app or service with a REST API.
Supported API Endpoints for Mailersend
Send email
This endpoint allows you to send an asynchronous email.
Send email
This endpoint allows you to send an email message.
Send bulk emails
This endpoint allows you to send multiple asynchronous emails.
Get bulk email status
Check the bulk email status using the bulk_email_id.
Send bulk email
Send multiple emails in a single request.
Get activity
Retrieve the activity logs of sent emails.
List activities
Get a list of email activities using the API.
Get analytics
Fetch analytics data for your sent emails.
List domains
Get a list of validated domains for your account.
List sender identities
Retrieve a list of sender identities associated with your account.
Manage inbound routing
Set up and manage inbound routing for received emails.
List inbound routes
Retrieve information about multiple inbound routes.
Get inbound route
Retrieve a single inbound route using the inbound_id.
Add inbound route
Add a new inbound route to a domain.
Update inbound route
Update the information of an existing inbound route.
Delete inbound route
Use this request to delete an inbound route.
List messages
Retrieve a list of sent messages.
Schedule a message
Create and schedule messages to be sent at a later time.
List recipients
Get a list of recipients for the emails you've sent.
List recipients
Retrieve the email addresses of recipients using this GET request.
Get a single recipient
Retrieve the information of a single recipient and its domain.
Delete recipient
Delete the information of a single recipient and its domain using this DELETE request.
Create recipient
Add a recipient to the block list using a specified domain ID and recipient email.
Add to block list by pattern
Add a recipient to the block list using patterns that match email addresses.
Add to hard bounces
Add a recipient to hard bounces under a specified domain ID.
Add to spam complaints
Add a recipient to spam complaints using their email address and domain ID.
Add to unsubscribes
Add a recipient to unsubscribes with their domain ID and email.
Create a template
Generate and save email templates.
Manage webhooks
Set up and configure webhooks for your application.
Send SMS
Utilize this endpoint to send SMS messages.
List phone numbers
Retrieve a list of phone numbers used for sending SMS.
List SMS messages
Get a record of SMS messages sent from your account.
List users
Retrieve a list of users in your MailerSend account.
Create rejected-shortened-url
There was an error with the shortened URL used.
Create destination-rejected-message
The destination carrier has rejected the message but provided no specific reason.
Create destination-rejected-message-size-invalid
Carrier has rejected for message length is invalid or too long.
Create destination-rejected-malformed
Carrier is rejecting the message malformed.
Create destination-rejected-handset
The handset has rejected the message.
Create destination-spam-detected
The Carrier is reporting this message as blocked for SPAM.
Create destination-rejected-due-to-user-opt-out
User has opted out of receiving messages from a particular sender.
Create volumetric-violation
The carrier rejected the message due to a volumetric violation.
Create tfn-not-verified
The message was blocked due to the toll free number not being verified.
Create temporary-app-error
An application within the MailerSend service is experiencing a temporary error.
Create destination-carrier-queue-full
Carrier Service Unavailable.
Create destination-app-error
The carrier is reporting a general error associated with their application processing the message.
Create message-send-failed
The destination carrier has reported a general service failure with sending the message.
List identities
Retrieve information about sender identities with this GET request.
Get identity
Retrieve a single sender identity by its identity ID.
Get identity by email
Retrieve a single sender identity by email.
Add identity
Add a new sender identity to send emails without verification.
Update sender identity
Update the information of an existing sender identity.
Update sender identity by email
Update the information of an existing sender identity by email.
Delete identity
If you want to delete a sender identity, use this DELETE request.
Delete identity by email
If you want to delete a sender identity by email, use this DELETE request.
Update inbound route
Update an existing inbound routing configuration.
Get recipients
Retrieve the recipients in a blocklist of an account or domain by passing the blocklist ID with this GET request.
List hard bounces
Retrieve the hard bounced recipients of an account or domain.
List spam complaints
Retrieve the recipients who have made a spam complaint for an account or domain.
List unsubscribes
Retrieve the unsubscribed recipients from an account or domain.
Retrieve on hold recipients
Retrieve on hold recipients for an account or domain by passing its ID.
Add a recipient to a blocklist
Add a recipient to a blocklist with this request.
Add hard bounce
Add a hard bounce for one or more recipients.
Add spam complaint
Add a spam complaint for one or more recipients.
Set unsubscribed
Set one or more recipients as unsubscribed.
Delete blocklist entries
Delete one or more blocklist entries with this request.
Delete hard bounces
Delete one or more hard bounces from recipients by passing the hard bounces IDs.
Delete spam complaints
Delete one or more spam complaints from recipients by providing the spam complaint IDs.
Delete unsubscribes
Delete one or more unsubscribes from recipients by providing the unsubscribe IDs.
To set up Mailersend integration, add the HTTP Request node to your workflow canvas and authenticate it using a generic authentication method. The HTTP Request node makes custom API calls to Mailersend to query the data you need using the API endpoint URLs you provide.
These API endpoints were generated using n8n
n8n AI workflow transforms web scraping into an intelligent, AI-powered knowledge extraction system that uses vector embeddings to semantically analyze, chunk, store, and retrieve the most relevant API documentation from web pages. Remember to check the Mailersend official documentation to get a full list of all API endpoints and verify the scraped ones!
Supported API Endpoints for Missive
Reopen conversation
Reopens the current conversation.
Assign users
Assigns users to the current conversation.
Create draft
Creates a new draft in a new conversation.
List conversations
List conversations visible to the user who owns the API token.
Get conversation
Fetch a specific conversation using the conversation id.
List messages
List messages in the conversation passed as `id`.
Create conversation
Creates a new conversation.
Archive conversation
Archives a specified conversation.
Trash conversation
Moves the specified conversation to trash.
Move to inbox
Moves the specified conversation back to inbox.
Comment on conversation
Adds a comment to a specified conversation.
Create task
Creates a new task related to a conversation.
Add labels
Adds labels to the specified conversation.
Remove labels
Removes labels from the specified conversation.
Close conversation
Closes a specified conversation.
Reopen conversation
Reopens a specified closed conversation.
Assign conversation
Assigns a specified conversation to a user.
Add assignees
Adds assignees to a specified conversation.
Remove assignees
Removes assignees from a specified conversation.
Set color
Sets color for the specified conversation.
Set subject
Sets the subject of the specified conversation.
Fetch conversations
Fetches attributes for the given conversation IDs.
Create conversation
Creates a new conversation.
Archive conversation
Archives current conversation.
Trash conversation
Trashes current conversation.
Move to Inbox
Moves current conversation to Inbox.
Create comment
Creates a comment in the current conversation.
Add labels
Adds labels to the current conversation.
Remove labels
Removes labels from the current conversation.
Close conversation
Closes the current conversation.
Create draft in current conversation
Creates a new draft in the current conversation.
Reply to conversation
Replies to current conversation latest message.
Forward message
Forwards current conversation latest message.
Insert text
Inserts content as text in the currently selected composer.
Insert HTML
Inserts content as HTML in the currently selected composer.
Create draft
Creates a new draft in Missive.
Create report
Create analytics report
Get report
Get analytics report
Create contact
Creates new contacts in the contact book.
Update contact(s)
Update existing contacts with new information based on their IDs.
List contacts
Retrieve a list of contacts stored in Missive.
Get a contact
Fetch a specific contact using the contact ID.
List contact books
List the contact books that the authenticated user has access to.
List contact groups
List contact groups or organizations linked to a contact book.
Create message
Create an incoming message in a custom channel.
Get message
Fetch a specific message headers, body and attachments using the message id.
List messages
Fetch messages matching an email Message-ID.
Fetch messages
Fetches attributes for the given message IDs.
List organizations
List organizations the authenticated user is part of.
Create post
Create a post in a conversation or append it to an existing one.
List responses
List responses for the authenticated user.
Get response
Fetch a specific response using the response id.
List shared labels
List shared labels in organizations the authenticated user is part of.
List teams
List teams in organizations the authenticated user is part of.
List users
List users in organizations the authenticated user is part of.
Fetch users
Fetches attributes for all users.
Get stored data
Retrieve data that has been previously stored using storeSet.
Set stored data
Store data that remains consistent between page reloads and app reloads.
Fetch labels
Fetches attributes for all shared labels.
Create task
Creates a task in the current conversation.
To set up Missive integration, add the HTTP Request node to your workflow canvas and authenticate it using a generic authentication method. The HTTP Request node makes custom API calls to Missive to query the data you need using the API endpoint URLs you provide.
These API endpoints were generated using n8n
n8n AI workflow transforms web scraping into an intelligent, AI-powered knowledge extraction system that uses vector embeddings to semantically analyze, chunk, store, and retrieve the most relevant API documentation from web pages. Remember to check the Missive official documentation to get a full list of all API endpoints and verify the scraped ones!
Mailersend and Missive integration details
FAQ
Can Mailersend connect with Missive?
Can I use Mailersend’s API with n8n?
Can I use Missive’s API with n8n?
Is n8n secure for integrating Mailersend and Missive?
How to get started with Mailersend and Missive integration in n8n.io?
Looking to integrate Mailersend and Missive in your company?
The world's most popular workflow automation platform for technical teams including
Why use n8n to integrate Mailersend with Missive
Build complex workflows, really fast
