Integrate Slack with 500+ apps and services

This workflow allows you to have a Slack alert when one of your n8n workflows gets an issue. Error trigger**: This node launched the workflow when one of your active workflows gets an issue Slack node**: This node sends you a customized message to alert you and to check the error ⚠️ You don't have to activate this workflow for it to be effective

This workflow will trigger daily at 6am to retrieve your day's calendar events from Google Calendar and send them as a summary message to Slack. I've used a low-code method to filter the dates as I can't code much in JSON :) Contact me on https://twitter.com/sami_abid if you have any questions!

This workflow stores responses form responses of Typeform in Airtable. The workflow also sends the response to a channel on Slack. You will have to configure the Set node if your form uses different fields.

This workflow sends a message on Slack when site deployment fails. Netlify Trigger node: This node triggers the workflow when the site deployment fails. Slack node: This node sends a message on Slack alerting the team about the failed deployment. If you want to send a message to a different platform, replace the Slack node with the node of the respective platform.

Trigger on new Typeform form submission Write data to Google Sheet Check severity of problem If very severe post message to Slack If not so severe just send an email Assumptions Google Sheet Sheet in Spreadsheet called "Problems". Columns Names: Name Email Severity Problem Example Sheet: https://docs.google.com/spreadsheets/d/17fzSFl1BZ1njldTfp5lvh8HtS0-pNXH66b7qGZIiGRU Typeform Typeform formular with questions named exactly like the columns of the Google Sheet.

This workflow is triggered when a meeting is scheduled via Calendly. Then, an activity is automatically created in Pipedrive and 15 minutes after the end of the meeting, a message is sent to the interviewer in Slack, reminding them to write down their notes and insights from the meeting.

This workflow allows you to check the To-Do list on Notion and send a message on Slack. Prerequisites Create a Notion page similar to this page. Create credentials for Notion by following the instructions mentioned in the documentation. Follow the steps mentioned in the documentation to create credentials for Slack. Cron node: This node triggers the workflow every day. Notion node: This node fetches all the tasks from Notion. IF node: This node checks if the task is assigned to a particular user. Create a Direct Message: This node will create a direct message channel with the user. Send a Direct Message: This node will send the to-do lists in the direct message. NoOp: This node is connected to the false output of the IF node. If the condition is false, no further action will be taken.

To notify by Slack and mail all modification on a Google Sheet

This workflow allows you to add positive feedback messages to a table in Notion. Prerequisites Create a Typeform that contains Long Text filed question type to accepts feedback from users. Get your Typeform credentials by following the steps mentioned in the documentation. Follow the steps mentioned in the documentation to create credentials for Google Cloud Natural Language. Create a page on Notion similar to this page. Create credentials for the Notion node by following the steps in the documentation. Follow the steps mentioned in the documentation to create credentials for Slack. Follow the steps mentioned in the documentation to create credentials for Trello. Typeform Trigger node: Whenever a user submits a response to the Typeform, the Typeform Trigger node will trigger the workflow. The node returns the response that the user has submitted in the form. Google Cloud Natural Language node: This node analyses the sentiment of the response the user has provided and gives a score. IF node: The IF node uses the score provided by the Google Cloud Natural Language node and checks if the score is positive (larger than 0). If the score is positive we get the result as True, otherwise False. Notion node: This node gets connected to the true branch of the IF node. It adds the positive feedback shared by the user in a table in Notion. Slack node: This node will share the positive feedback along with the score and username to a channel in Slack. Trello node: If the score is negative, the Trello node is executed. This node will create a card on Trello with the feedback from the user.

This workflow automatically finds verified and nominative email and all information (with Dropcontact) to prospect properly from a Typeform. Typeform Trigger**: This node triggers the workflow when a new Typeform is submitted. Dropcontact**: This node fetches the new contact information and returns the data of the person and the company associated with the email address, job function, and all legal information. Airtable - List**: This will list all the entries from your table in order to check if the subscriber is new or not. If**: Does the contact exist in your Airtable yet? Set**: Set values on the Airtable values Airtable Update**: This node updates your record with new and up-to-date data Airtable - Create**: This node creates a new record when the subscriber is a new lead Slack**: This node sends an alert when the record is added or updated

Get your contributors GitHub information with a slash command in your Slack Workspace.

> This has been updated to support the Query feature added to the Zendesk node in 0.144.0 This workflow will post all New and Open tickets without an agent assigned to a Slack channel on a schedule. The function node is used in this example to merge multiple inputs into one output message which is then used as the Slack message. The output in Slack will be similar to the below message, The "TICKET_ID" will be a link to the ticket. > Unassigned Tickets TICKET_ID [STATUS] - TICKET_SUBJECT Usage Update the Cron schedule, The default value is 16:30 daily. Update the Credentials in the Zendesk nodes Update the Credentials and Channel in the Slack Node Grab a coffee and enjoy! Zendesk Query In the Zendesk node we are using the query assignee:none status<pending this returns all New and Open tickets with no assignee allowing us to remove the extra nodes.

Nathan is a proof of concept framework for creating a personal assistant who can handle various day to day functions for you.

Hello there! This is a supporting workflow for an Airtable Base that handles Recurring Tasks. The objective of the workflow is to handle creating tasks on a recurring basis depending on the Airtable Setup You can access that Airtable Template here for complete context- Airtable Universe The functionality of the workflow can be easliy adapted to any data source. Feel free to contact us with any doubts or questions at http://sidetool.co ​ Use this as is, or adapted to your existing Airtable Base – embrace automated simplicity! 🚀🌟

Who this template is for This template is for everyone who needs to work with XML data a lot and wants to convert it to JSON instead. Use case Many products still work with XML files as their main language. Unfortunately, not every software still supports XML, as many switched to more modern storing languages such as JSON. This workflow is designed to handle the conversion of XML data to JSON format via a webhook call, with error handling and Slack notifications integrated into the process. How this workflow works Triggering the workflow: This workflow initiates upon receiving an HTTP POST request at the webhook endpoint specified in the "POST" node. The endpoint, designated as , can be accessed externally by sending a POST request to that URL. Data routing and processing: Upon receiving the POST request, the Switch node routes the workflow's path based on conditions determined by the content type of the incoming data or any encountered errors. The Extract From File and Edit Fields (Set) nodes manage XML input processing, adapting their actions according to the data's content type. XML to JSON conversion: The XML data extracted from the input is passed through the "XML" node, which performs the conversion process, transforming it into JSON format. Response handling: If the XML-to-JSON conversion is successful, a success response is sent back with a status of "OK" and the converted JSON data. If there are any errors during the XML-to-JSON conversion process, an error response is sent back with a status of "error" and an error message. Error handling: in case of an error during processing, the workflow sends a notification to a Slack channel designated for error reporting. Set up steps Set up your own in the Webhook node. While building or testing a workflow, use a test webhook URL. When your workflow is ready, switch to using the production webhook URL. Set credentials for Slack.

Use case If you have a form where potential leads reach out, then you probably want to analyze those leads and send a notification if certain requirements are met, e.g. employee number is high enough. MadKudu is built exactly to solve this problem. We use it along with Hunter to alert on Slack for high quality leads. How to setup Add you MadKudu, Hunter, and Slack credentials Set the Slack channel Click the Test Workflow button, enter your email and check the Slack channel Activate the workflow and use the form trigger production URL to collect your leads in a smart way How to adjust this template You may want to raise or lower the threshold for your leads, as you see fit.

This n8n workflow demonstrates how to create a really simple yet effective customer support channel and pipeline by combining Slack, Linear and AI tools. Built on n8n's ability to integrate anything, this workflow is intended for small support teams who want to maximise re-use of the tools they already have with an interface which is doesn't require any onboarding. Read the blog post here: https://blog.n8n.io/automated-customer-support-tickets-with-n8n-slack-linear-and-ai/ How it works The workflow is connected to a slack channel setup with the customer to capture support issues. Only messages which are tagged with a "✅" reaction are captured by the workflow. Messages are tagged by the support team in the channel. Each captured support issue is sent to the AI model to classify, prioritise and rewrite into a support ticket. The generated support ticket is uploaded to Linear for the support team to investigate and track. Support team is able to report back to the user via the channel when issue is fixed. Requirements Slack channel to be monitored Linear account and project Customising this workflow Don't have Linear? This workflow can work just as well with traditional ticketing systems like JIRA.

Who is this for? This template is for everyone who manages their blog entries in Notion and want to have an easy way to transform them to Webflow. What this workflow does This workflow syncs your blog posts saved in a Notion Database once a day to Webflow. Sync Notion properties, rich text and cover image with your collection. Works with most elements: H1, H2, H3, normal text, bold text, italic text, links, quotes, bulleted lists, numbered lists, and images (under 4MB). Set up steps Connect your accounts. Add a "slug" field in Notion. Add a "Sync to Webflow?" checkbox in Notion. Run a test and map your collection data. Whenever the workflow runs, all the checked posts will be updated in the Webflow collection, whether it's a new post or an existing one.

This workflow shows you how to post a message to a Slack channel and add a file attachment. It also shows you the general pattern for working with Binary data in n8n (any file like a PDF, Image etc). Specifically, this workflow shows how to download a file from a URL into your workflow, and then upload it to Slack. Video walkthrough Watch this 3 min Loom video for a walkthrough and more context on this general pattern:

This n8n workflow demonstrates how to automate oftern time-consuming form filling tasks in the early stages of the tendering process; the Request for Proposal document or "RFP". It does this by utilising a company's knowledgebase to generating question-and-answer pairs using Large Language Models. How it works A buyer's RFP is submitted to the workflow as a digital document that can be parsed. Our first AI agent scans and extracts all questions from the document into list form. The supplier sets up an OpenAI assistant prior loaded with company brand, marketing and technical documents. The workflow loops through each of the buyer's questions and poses these to the OpenAI assistant. The assistant's answers are captured until all questions are satisified and are then exported into a new document for review. A sales team member is then able to use this document to respond quickly to the RFP before their competitors. Example Webhook Request curl --location 'https://<n8n_webhook_url>' \ --form 'id="RFP001"' \ --form 'title="BlueChip Travel and StarBus Web Services"' \ --form 'reply_to="[email protected]"' \ --form 'data=@"k9pnbALxX/RFP Questionnaire.pdf"' Requirements An OpenAI account to use AI services. Customising the workflow OpenAI assistants is only one approach to hosting a company knowledgebase for AI to use. Exploring different solutions such as building your own RAG-powered database can sometimes yield better results in terms of control of how the data is managed and cost.

This workflow uses a WooCommerce trigger that will run when an order has been updated and the status is refunded. If the value of this is over 100 it will post it to a Slack channel. To use this workflow you will need to set the credentials to use for the WooCommerce and Slack nodes, You will also need to pick a channel to post the message to.

Use case Error workflows are an important part of running workflows in production. How to setup Add Slack creds Add this error workflow to other workflows (docs)

Who is this template for? This workflow template is designed for Sales and Customer Success professionals seeking alerts when potential high-value users, prospects, or existing customers register for a Discourse community. Leveraging Clearbit, it retrieves enriched data for the new member to assess their value. Example result in Slack How it works Each time a new member is created in Discourse, the workflow runs (powered by Discourse's native Webhooks feature). After filtering out popular private email accounts, we run the member's email through Clearbit to fetch available information on the member as well as their organization. If the enriched data meets certain criteria, we send a Slack message to a channel. This message has a few quick actions: Open LinkedIn profile and Email member Set up instructions Overview is below. Watch this 🎥 quick set up video for detailed instructions on how to get the template running, as well as how to customize it. Complete the Set up credentials step when you first open the workflow. You'll need a Discourse (admin user), Clearbit, and Slack account. Set up the Webhook in Discourse, linking the On new Discourse user Trigger with your Discourse community. Set the correct channel to send to in the Post message in channel step After testing your workflow, swap the Test URL to Production URL in Discourse and activate your workflow Template was created in n8n v1.29.1

This n8n workflow automates the handling of security detections from CrowdStrike, streamlining incident response and notification processes. The workflow is triggered daily at midnight by the Schedule Trigger node. It begins by fetching recent security detections from CrowdStrike using an HTTP Request node. The response is then split into individual detections for further processing. Each detection is enriched by querying the CrowdStrike API for detailed information using another HTTP Request node. The workflow then processes these detections sequentially using the Split In Batches node. Next, it looks up behavioral information associated with each detection in VirusTotal using two HTTP Request nodes. One node queries VirusTotal based on SHA256 values, and the other based on IOC (Indicator of Compromise) values. The workflow includes a 1-second pause using the Wait node to prevent rate limiting when making requests to the VirusTotal API. Subsequently, the workflow sets fields with relevant details from both CrowdStrike and VirusTotal, including detection links, confidence scores, filenames, usernames, and more. These details are concatenated using an Item Lists node for each detection. The final step involves creating Jira issues for each detection, including summaries with CrowdStrike alert severity and hostnames, as well as descriptions that incorporate information from CrowdStrike and VirusTotal. Information about this issue is then sent via a Slack message to a Slack user. Potential issues during setup might include configuring the Schedule Trigger node to trigger at the correct time zone and handling potential rate limiting from the VirusTotal API, which could lead to throttled requests. Additionally, the note about a possible typo in the URL for the Virustotal nodes should be addressed to ensure correct API calls. The Jira node may need to be replaced with the latest version for compatibility. Properly configuring API credentials and handling errors that may occur during API requests are essential for a smooth workflow operation. Careful testing with sample data is recommended to validate the workflow's functionality and ensure it aligns with your organization's security incident response processes.

This workflow automatically posts a message in Slack when a new invoice is uploaded in Stripe, and it updates the fields in the HubSpot CRM. Prerequisites A Slack account and credentials A HubSpot account and credentials A Stripe account and credentials Nodes Stripe Trigger node triggers the workflow when a new invoice is uploaded. IF nodes filter the invoices that don't have a PO number and if there is no deal for the PO. HubSpot nodes retrieve deals with the specific PO number and update the deal status to 'paid'. Slack nodes post messages about the deals in a Slack channel.

Use GPT-3 to classify email responses in lemlist. And automate: Slack alerts when a lead is interested the creation of tasks when a lead is OOO unsubscription of leads when they request it

Use Case When tracking your contacts and leads in Hubspot CRM, every new contact might be a potential customer. To guarantee that you're keeping the overview you'd normally need to look at every new lead that is coming in manually to identify high-quality leads to prioritize their engagement and optimize the sales process. This workflow saves the work and does it for you. What this workflow does The workflow runs every 5 minutes. On every run, it checks the Hubspot CRM for contacts that were added since the last check. It then checks if they meet certain criteria (in this case if they are making +5m annual revenue) and alerts you in Slack for every match. Setup Add Hubspot, and Slack credentials. Click on Test workflow. How to adjust this workflow to your needs Change the schedule interval Adjust the criteria to send alerts

This workflow checks for new emails in a mailbox and if the email body contains the word "invoice" it will send the attachment to Mindee. It then posts a message to Slack to let the team know a payment needs to be made, If the value of the invoice is over 1000 it will also email the finance manager. To use this workflow you will need to configure the IMAP node to select the correct mailbox to use then configure the Mindee node to use your credentials. Once that is done the Send Email node will need to be configured to use the correct mail server and to send to the correct people, The last thing to configure is the Slack node this will need your Slack credentials and the channel you want to post the message to.

This workflow uses a Hubspot Trigger to check for new companies. It then checks the companies website exists using the HTTP node. If it doesn't, a message is sent to Slack. To configure this workflow you will need to set the credentials for the Hubspot and Slack Nodes. You will also need to select the Slack channel to use for sending the message.

This n8n workflow serves as a powerful cybersecurity and threat intelligence tool to look up URLs or IP addresses through industry standard threat intelligence vendors. It starts with either a form submission or a webhook trigger, allowing users to input data, URLs or IPs that require analysis. The workflow then splits into two paths depending on whether the input data is an IP or URL. If an IP was given, it sets the ip variable to the IP; however if a URL was given the workflow will perform a DNS lookup using Google Public DNS and sets the ip variable based on the results from Google. The workflow then checks the obtained IP addresses against GreyNoise services, with one branch utilizing GreyNoise RIOT IP Lookup to assess IP reputation and association with known benign services, and the other using GreyNoise IP Context to evaluate potential threats. The results from both GreyNoise services are merged to create a comprehensive analysis which includes the IP, classification (benign, malicious, or unknown), IP location, tags to identify activity or malware, category, and trust level. In parallel, a VirusTotal scan is initiated for the URL/IP to identify if it is malicious. A 5-second wait ensures proper processing, and the workflow subsequently polls the scan result to determine when the analysis is complete. The workflow then summarizes the analysis including the overall security vendor analysis results, blockList analysis, OpenPhish analysis, the URL, and the IP. Finally, the workflow combines the summarized intelligence from both GreyNoise and VirusTotal to provide a thorough analysis of the URL/IP. This summarized intelligence can then be emailed to the user that filled out the form via Gmail or it can be sent to the user via a Slack message. Setting up this workflow may require proper configuration of the form submission or webhook trigger, and ensuring that the GreyNoise and VirusTotal API credentials are correctly integrated. Users should also consider the potential volume of data and API rate limits, as excessive requests could lead to issues. Proper documentation and validation of input data are crucial to ensure accurate and meaningful results in the final report.

This workflow enriches new Pipedrive organization's data by adding a note to the organization object in Pipedrive. It assumes there is a custom "website" field in your Pipedrive setup, as data will be scraped from this website to generate a note using OpenAI. Then, a notification is sent in Slack. ⚠️ Disclaimer This workflow uses a scraping API. Before using it, ensure you comply with the regulations regarding web scraping in your country or state. Important Notes The OpenAI model used is GPT-4o, chosen for its large input token capacity. However, it is not the cheapest model if cost is very important to you. The system prompt in the OpenAI Node generates output with relevant information, but feel free to improve or modify it according to your needs. How It Works Node 1: Pipedrive Trigger - An Organization is Created This is the trigger of the workflow. When an organization object is created in Pipedrive, this node is triggered and retrieves the data. Make sure you have a "website" custom field in Pipedrive (the name of the field in the n8n node will appear as a random ID and not with the Pipedrive custom field name). Node 2: ScrapingBee - Get Organization's Website's Homepage Content This node scrapes the content from the URL of the website associated with the Pipedrive Organization created in Node 1. The workflow uses the ScrapingBee API, but you can use any preferred API or simply the HTTP request node in n8n. Node 3: OpenAI - Message GPT-4o with Scraped Data This node sends HTML-scraped data from the previous node to the OpenAI GPT-4o model. The system prompt instructs the model to extract company data, such as products or services offered and competitors (if known by the model), and format it as HTML for optimal use in a Pipedrive Note. Node 4: Pipedrive - Create a Note with OpenAI Output This node adds a Note to the Organization created in Pipedrive using the OpenAI node output. The Note will include the company description, target market, selling products, and competitors (if GPT-4o was able to determine them). Node 5 & 6: HTML To Markdown & Code - Markdown to Slack Markdown These two nodes format the HTML output to Slack Markdown. The Note created in Pipedrive is in HTML format, as specified by the System Prompt of the OpenAI Node. To send it to Slack, it needs to be converted to Markdown and then to Slack Markdown. Node 7: Slack - Notify This node sends a message in Slack containing the Pipedrive Organization Note created with this workflow.

The template allows to make Dropcontact batch requests up to 250 requests every 10 minutes (1500/hour). Valuable if high volume email enrichment is expected. Dropcontact will look for email & basic email qualification if first_name, last_name, company_name is provided. +++++++++++++++++++++++++++++++++++++++++ Step 1: Node "Profiles Query" Connect your own source (Airtable, Google Sheets, Supabase,...) the template is using Postgres by default. Note I: Be careful your source is only returning a maximum of 250 items. Note II: The next node uses the next variables, make sure you can map these from your source file: first_name last_name website (company_name would work too) full_name (see note) Note III: This template is using the Dropcontact Batch API, which works in a POST & GET setup. Not a GET request only to retrieve data, as Dropcontact needs to process the batch data load properly. +++++++++++++++++++++++++++++++++++++++++ Step 2: Node "Data Transformation" Will transform the input variables in the proper json format. This json format is expected from the Dropcontact API to make a batch request. "full_name" is being used as a custom identifier to update the returned email to the proper contact in your source database. To make things easy, use a unique identiefer in the full_name variable. +++++++++++++++++++++++++++++++++++++++++ Step3: Node: "Bulk Dropcontact Requests". Enter your Dropcontact credentials in the node: Bulk Dropcontact Requests. +++++++++++++++++++++++++++++++++++++++++ Step4: Connect your output source by mapping the data you like to use. +++++++++++++++++++++++++++++++++++++++++ Step5: Node: "Slack" (OPTIONAL) Connect your slack account, if an error occur, you will be notified. TIP: Try to run the workflow with a batch of 10 (not 250) as it might need to run initially before you will be able to map the data to your final destination. Once the data fields are properly mapped, adjust back to 250.

Summary Onfleet is a last-mile delivery software that provides end-to-end route planning, dispatch, communication, and analytics to handle the heavy lifting while you can focus on your customers. This workflow template listens to Onfleet driver sign-up events and automatically notifies you on Slack. Configurations Update the Onfleet node with your own Onfleet credentials, to register for an Onfleet API key, please visit https://onfleet.com/signup to get started Update the Slack node with your own Slack credentials Update the Slack channel to something that exists in your Slack workspace, the default is set to #new-driver-signup in this example which may not apply to your workspace Update the Slack message to something customized, ideally with driver information such as phone number and name

This workflow uses a Mautic Trigger to check for new contacts. It then validates the contacts' email using OneSimpleAPI. If there are any a message will be sent to Slack. To configure this workflow you will need to set the credentials for the Hubspot, OneSimpleAPI and Slack Nodes. You will also need to select the Slack channel to use for sending the message.

This n8n workflow serves as an incident response and notification system for handling potentially malicious emails flagged by Sublime Security. It begins with a Webhook trigger that Sublime Security uses to initiate the workflow by POSTing an alert. The workflow then extracts message details from Sublime Security using an HTTP Request node, based on the provided messageId, and subsequently splits into two parallel paths. In the first path, the workflow looks up a Slack user by email, aiming to find the recipient of the email that triggered the alert. If a user is found in Slack, a notification is sent to them, explaining that they have received a potentially malicious email that has been quarantined and is under investigation. This notification includes details such as the email's subject and sender. The second path checks whether the flagged email has been opened by inspecting the read_at value from Sublime Security. If the email was opened, the workflow prepares a table summarizing the flagged rules and creates a corresponding issue in Jira Software. The Jira issue contains information about the email, including its subject, sender, and recipient, along with the flagged rules. Issues that someone might encounter when setting up this workflow for the first time include potential problems with the Slack user lookup if the user information is not available or if Slack API integration is not configured correctly. Additionally, the issue creation in Jira Software may not work as expected, as indicated by the note that mentions a need for possible node replacement. Thorough testing and validation with sample data from Sublime Security alerts can help identify and resolve any potential issues during setup.

This workflow uses a WooCommerce trigger that will run when an order has been placed. If the value of this is over 100 it will post it to a Slack channel. To use this workflow you will need to set the credentials to use for the WooCommerce and Slack nodes, You will also need to pick a channel to post the message to.

Who this is for This workflow is for sales people who want to quickly and efficiently follow up with their leads What this workflow does This workflow starts every time a new reply is received in lemlist. It then classifies the response using openAI and creates the correct follow up task. The follow-up tasks currently include: Slack alerts when a lead for each new replies Tag interested leads in lemlist Unsubscription of leads when they request it The Slack alerts include: Lead email address Sender email address Reply type (positive, not interested...etc) A preview of the reply Setup To set this template up, simply follow the stickies steps in it How to customize this workflow to your needs Adjust the follow up tasks to your needs Change the Slack notification to your needs ...

This n8n workflow provides a comprehensive automation solution for processing email attachments, specifically targeting enhanced security protocols for organizations that use platforms like Outlook. It starts with the IMAP node, which is set to ingest emails and identify those with .eml attachments. Once an email with an attachment is ingested, the workflow progresses to a conditional operation where it checks for the presence of attachments. If an attachment is found, the binary data is moved and converted to JSON format, preparing it for further analysis. This meticulous approach to detecting attachments is crucial for maintaining a robust security posture, allowing for the proactive identification and handling of potentially malicious content. In the subsequent stage, the workflow leverages the capabilities of Sublime Security by analyzing the email attachment. The binary file is scrutinized for threats, and upon detection, the information is split to matched and unmatched data. This process not only speeds up the threat detection mechanism but also ensures compatibility with other systems, such as Slack, resulting in a smooth and efficient workflow. This automation emphasizes operational efficiency with minimal user involvement, enhancing the organization's defense against cyber threats. The final phase of the workflow involves preparing the output for a Slack report. Whether a threat is detected or not, n8n ensures that stakeholders are immediately informed by dispatching comprehensive reports or notifications to Slack channels. This promotes a culture of transparency and prompt action within the team.

Use case Slackbots are super powerful. At n8n, we have been using them to get a lot done.. But it can become hard to manage and maintain many different operations that a workflow can do. This is the base workflow we use for our most powerful internal Slackbots. They handle a lot from running e2e tests for Github branch to deleting a user. By splitting the workflow into many subworkflows, we are able to handle each command seperately, making it easier to debug as well as support new usecases. In this template, you can find eveything to setup your own Slackbot (and I made it simple, there's only one node to configure 😉). After that, you need to build your commands directly. This bot can create a new thread on an alerts channel and respond there. Or reply directly to the user. It responds for help request to return a help page. It automatically handles unknown commands. It also supports flags and environment variables. For example /cloudbot-test info mutasem --full-info -e env=prod would give you the following info, when calling subworkflow. How to setup Add Slack command and point it up to the webhook. For example. Add the following to the Set config node alerts_channel with alerts channel to start threads on instance_url with this instance url to make it easy to debug slack_token with slack bot token to validate request slack_secret_signature with slack secret signature to validate request help_docs_url with help url to help users understand the commands Build other workflows to call and add them to commands in Set Config. Each command must be mapped to a workflow id with an Execute Workflow Trigger node Activate workflow 🚀 How to adjust Add your own commands. Depending on your need, you might need to lock down who can call this.

This workflow uses a WooCommerce trigger that will run when a new product has been added, It will then post it to Slack so your team is always kept up to date with new products. To use this workflow you will need to set the credentials to use for the WooCommerce and Slack nodes, You will also need to pick a channel to post the message to.

This n8n workflow takes Slack conversations and turns them into Calendar events complete with accurate date and times and location information. Adding and removing attendees are also managed automatically. How it works Workflow monitors a Slack channel for invite messages with a "📅" reaction and sends this to the AI agent. AI agent parses the message determining the time, date and location. Using its Location tool, the AI agent searches for the precise location address from Google Maps. Using its Calendar tool, the AI agent creates a Google Calendar invite with the title, description and location address for the user. Back in the Slack channel, others can RSVP to the invite by reacting with the "✅" emjoi. The workflow polls the message after a while and adds the users who have reacted to the Calendar Invite as attendees. Conversely, removing any attendees who have since removed their reaction. Examples Jill: "Hey team, I'm organising a round of Laser Tag (Bunker 51) next Thursday around 6pm. Please RSVP with a ✅" AI: "I've helped you create an event in your calendar https://cal.google.com/..." Jack: "✅" AI: "I've added Jack to the event as an attendee". Requirements Slack channel to attach the workflow OpenAI account to use a GPT model Google Calendar to create and update events Customising the Workflow This workflow can work with other messaging platforms that support reactions or tagging like features such as discord. Don't use Google Calendar? Swap it out for Outlook or your own. Use any combinations of emjoi reactions and add new rules like "RSVP maybe" which could send reminder updates nearer the event date.

This workflow will collect the RSS feed data from the previous day and post them to a Slack channel. To use this workflow you will need to add your credentials to the Slack node and select the channel for notifications. You will also need to input the URL for the RSS feed.

This workflow uses a Hubspot Trigger to check for new contacts. It then validates the contacts' email using OneSimpleAPI. If there are any a message will be sent to Slack. To configure this workflow you will need to set the credentials for the Hubspot, OneSimpleAPI and Slack Nodes. You will also need to select the Slack channel to use for sending the message.

This template shows how you can take any event from any service, transform its data and send an alert to your desired app. Specifically, this example monitors a Linear project for new bug submissions. Then it only sends a Slack notification to a channel if a new bug is urgent. You can swap the Linear trigger for another Task Management app such as Jira or Asana; or an entirely different usecase. Setup instructions are located inside the workflow template.

This workflow offers an effective way to handle a chatbot's functionality, making use of multiple tools for information retrieval, conversation context storage, and message sending. It's a setup tailored for a Slack environment, aiming to offer an interactive, AI-driven chatbot experience. Note that to use this template, you need to be on n8n version 1.19.4 or later.

I'm currently trialing a 4 day work week for all staff at my company, and one of the major impacts on productivity is interruptions. As such, I opted to use N8N to create a workflow to monitor my Google Calendar and when an event starts, to update my Slack status with an emote and the title of the calendar task. Additionally I opted to include to change the colour of Philips Hue lamp located in my living room where my wife is currently working so she know's if she can interrupt me or not. My calendar is built on the theory behind the Diary Detox system and as such the Slack Status reflect the colours involved. This was achieved using the emote aliases for the relevant colour circles. The Philips Hue lamp status is changed via the local API with Home Assistant. This is a very similiar process to controlling it with something like the Streamdeck, but the workflow calls the Webhook instead of the Streamdeck. This process can be found in lots of Youtube videos such as this. This gives my wife a very quick and easy way to know if she can interrupt me in my office (when the lights are Green or Blue) or when I'm busy (Red). Please Note: The above images are not intended to be an incentive to create your own Squid Games. Additionally, when integrating Slack with N8N, there are 2 x APIs which can be used. Typically the Bot User OAuth Token is used, however in order for your Status to be updated, the User OAuth Token must be used with the users.profile:read and users.profile:write permissions enabled. For clarity, I have removed the Webhooks from the Workflow as this would allow any person to control my lights. These can be inserted in the HTTP Request nodes. Each node responds to a different automation within the Home Assistant infrastructure. Acknowledgement: I would also credit Jon (Discord) aka 8668 (Workflows) for writing the Function node which turns the ColorID into a named variable.

This n8n workflow demonstrates how to build a simple uptime monitoring service using scheduled triggers. Useful for webmasters with a handful of sites who want a cost-effective solution without the need for all the bells and whistles. How it works Scheduled trigger reads a list of website urls in a Google Sheet every 5 minutes Each website url is checked using the HTTP node which determines if the website is either in the UP or DOWN state. An email and Slack message are sent for websites which are in the DOWN state. The Google Sheet is updated with the website's state and a log created. Logs can be used to determine total % of UP and DOWN time over a period. Requirements Google Sheet for storing websites to monitor and their states Gmail for email alerts Slack for channel alerts Customising the workflow Don't use Google Sheets? This can easily be exchanged with Excel or Airtable.

This template shows how you can create reports on data in an app and share a summary in another app. Specifically, this example checks a Notion database for new submissions, filters for submissions with a specific tag, and then sends a Slack message with the number created this week. Setup instructions are located inside the workflow template.

Use case When working with multiple teams, bugs must get in front of the right team as quickly as possible to be resolved. Normally this includes a manual grooming of new bugs that have arrived in your ticketing system (in our case Linear). We found this way too time-consuming. That's why we built this workflow. What this workflow does This workflow triggers every time a Linear issue is created or updated within a certain team. For us at n8n, we created one general team called Engineering where all bugs get added in the beginning. The workflow then checks if the issue meets the criteria to be auto-moved to a certain team. In our case, that means that the description is filled, that it has the bug label, and that it's in the Triage state. The workflow then classifies the bug using OpenAI's GPT-4 model before updating the team property of the Linear issue. If the AI fails to classify a team, the workflow sends an alert to Slack. Setup Add your Linear and OpenAi credentials Change the team in the Linear Trigger to match your needs Customize your teams and their areas of responsibility in the Set me up node. Please use the format Teamname. Also, make sure that the team names match the names in Linear exactly. Change the Slack channel in the Set me up node to your Slack channel of choice. How to adjust it to your needs Play around with the context that you're giving to OpenAI, to make sure the model has enough knowledge about your teams and their areas of responsibility Adjust the handling of AI failures to your needs How to enhance this workflow At n8n we use this workflow in combination with some others. E.g. we have the following things on top: We're using an automation that enables everyone to add new bugs easily with the right data via a /bug command in Slack (check out this template if that's interesting to you) This workflow was built using n8n version 1.30.0

Upload invoices from Gmail to Google Drive daily

This n8n workflow is designed for security monitoring and incident response when suspicious login events are detected. It can be initiated either manually from within the n8n UI for testing or automatically triggered by a webhook when a new login event occurs. The workflow first extracts relevant data from the incoming webhook payload, including the IP address, user agent, timestamp, URL, and user ID. It then splits into three parallel processing paths. In the first path, it queries GreyNoise's Community API to retrieve information about the investigated IP address. Depending on the classification and trust level received from GreyNoise, the alert is given a High, Medium, or Low priority. This priority is assigned based on the best practices documentation from GreyNoise on how to apply their data to analysis. Once a priority is assigned, a message is sent to a Slack channel to notify users about the alert. The second path involves fetching geolocation data about the IP address using IP-API's Geolocation API and merging it with data from the UserParser node. This data is then combined with the data obtained from GreyNoise. In the third path, the UserParser node queries the Userparser IP address and user agent lookup API to obtain information about the user's IP and user agent. This data is merged with the IP-API data and GreyNoise data. The workflow then checks if the IP address is considered an unknown threat by examining both the noise and riot fields from GreyNoise. If it is considered an unknown threat, the workflow proceeds to retrieve the last 10 login records for the same user from a Postgres database. If there are any discrepancies in the login information, indicating a new location or device/browser, the user is informed via email. Potential issues when setting up this workflow include ensuring that credentials are correctly entered for GreyNoise and UserParser nodes, and addressing any discrepancies in the data sources that could lead to false positives or negatives in threat detection. Additionally, the usage of hardcoded API keys should be replaced with credentials for security and flexibility. Thorough testing and validation with sample data are crucial to ensure the workflow performs as expected and aligns with security incident response procedures.

This workflow monitor G2 reviews URLS. When a new review is published, it will: trigger a Slack notification record the review in Google Sheets To install it, you'll need: access to Slack, Google Sheets and ScrapingBee Full guide here: https://lempire.notion.site/Scrape-G2-reviews-with-n8n-3f46e280e8f24a68b3797f98d2fba433?pvs=4

This workflow let's a bot in Slack notify a specific channel when a new product in WooCommerce is published and live on the site. Prerequisites WooCommerce account Slack and a Slack bot How it works Listen for WooCommerce product creation If permalink starts with https://[your-url-here].com/product/ Slack bot notifies channel that a new product has been added. Please note, you must update the URL in the IF node to match your url. If your WooCommerce doesn't use the slug /product/, that will need to be updated too.

Job offers are a goldmine of information. Use them to boost your outreach results. They'll give you: more context to personalize your messaging a steady flow of new leads the right timing to contact your lead

This is a workflow that tries to answer user queries using the standard GPT-4 model. If it can't answer, it sends a message to Slack to ask for human help. It prompts the user to supply an email address. This workflow is used in Advanced AI examples | Ask a human in the documentation. To use this workflow: Load it into your n8n instance. Add your credentials as prompted by the notes. Configure the Slack node to use your Slack details, or swap out Slack for a different service.

This workflow searches for mentions of a company's name on Twitter and shares the tweets that mention it in a Slack channel. Prerequisites A Slack account and credentials A Twitter account and credentials Nodes Cron node executes the workflow every 10 minutes. Note that if you change the Mode from "Every X" you will need to manually update the Date & Time node to subtract the interval you are using. Set nodes set the required values (name of the Slack channel, name of the Twitter account to search for, the tweet text and URL). Date & Time node subtracts 10 minutes from the workflow execution time. Twitter node gets the latest 50 tweets that mention the specified account. IF node filters tweets posted in the past 10 minutes. Slack node posts tweets in a Slack channel.

This n8n workflow automates the analysis of email messages received in a Microsoft Outlook inbox to identify indicators of compromise (IOCs), specifically suspicious URLs. It can be triggered manually or scheduled to run daily at midnight. The workflow begins by retrieving up to 100 read email messages from the Outlook inbox. However, there seems to be a configuration issue as it should retrieve unread messages, not read ones. It then marks these messages as read to avoid processing them again in the future. The messages are then split into individual items using the Split In Batches node for sequential processing. For each email, the workflow analyzes its content to find URLs, which are considered potential IOCs. If URLs are found, the workflow proceeds to check these URLs for potential threats using two services, URLScan.io and VirusTotal, in parallel. In the first path, URLScan.io scans each URL, and if there are no errors, the results from URLScan.io and VirusTotal are merged. If there are errors, the workflow waits 1 minute before attempting to retrieve the URLScan results again. The loop then continues for the next email. In the second path, VirusTotal is used to scan the URLs, and the results are retrieved. Finally, the workflow checks if the data field is not empty, filtering out items where no data was found. It then sends a summarized Slack message to report details about the analyzed email, including the subject, sender, date, URLScan report URL, and VirusTotal verdict for URLs that were reported as malicious. Potential issues during setup include configuring the Outlook node to retrieve unread messages, resolving a configuration issue in the VirusTotal node, and handling authentication and API keys for both URLScan.io and VirusTotal nodes. Additionally, proper error handling and testing with various email content types and URLs are essential to ensure the workflow accurately identifies IOCs and reports them to the Slack channel.

What it does: This automation will dynamically create Slack channels for your Webflow forms and send formatted messages to those channels for every form submission you receive. When a new form is dedected, a message is sent in the #general Slack channel with a hyperlink to the new channel. This is useful for: Webflow form submissions can only notify a single user email as standard, but by using this workflow you can notify team members of new submissions instead of having to login into Webflow to go download form submissions. Usage guide Full written and video guide The main steps are to create credentials for Webflow and Slack, connect them, and start using the workflow. The video guide illustrates a realword usecase using a Webflow template. The video also breaks down each node in detail to explain what it does in case you want to make modifications.

How it works This template uses a slack app to connect with your google calendar, generate an instant google meet link and post it as a message in a slack channel Setup steps Firstly, you'll need to create a slack app Authenticate and connect your slack account Connect and choose the Google calendar you want to generate Google meet links for Customize your slack message Then using a /meet command in slack, you can instantly generate and post your Google meet links

This workflow creates a Slack thread when a new ticket is created in Zendesk. Subsequent comments on the ticket in Zendesk are added as replies to the thread in Slack. Prerequisites Zendesk account and Zendesk credentials. Slack account and Slack credentials. Slack channel to create threads in. How it works The workflow listens for new tickets in Zendesk. When a new ticket is created, the workflow creates a new thread/message in Slack. The Slack thread ID is then saved in one of the ticket's fields called "Slack thread ID". The next time a comment is added to the ticket, the workflow retrieves the Slack thread ID from the ticket's field and adds the comment to the thread/message in Slack as a reply. Setup This workflow requires that you set up a webhook in Zendesk. To do so, follow the steps below: In the workflow, open the On new Zendesk ticket node and copy the webhook URL. In Zendesk, navigate to Admin Center > Apps and integrations > Webhooks > Actions > Create Webhook. Add all the required details which can be retrieved from the On new Zendesk ticket node. The webhook URL gets added to the “Endpoint URL” field, and the “Request method” should match what is shown in n8n. Save the webhook. In Zendesk, navigate to Admin Center > Objects and rules > Business rules > Triggers > Add trigger. Give trigger a name such as “New tickets”. Under “Conditions” in “Meet ALL of the following conditions”, add “Status is New”. Under “Actions”, select “Notify active webhook” and select the webhook you created previously. In the JSON body, add the following: { "id": "{{ticket.id}}", "comment": "{{ticket.latest_comment_html}}" } Save the Zendesk trigger. You will also need to set up a field in Zendesk to store the Slack thread ID. To do so, follow the steps below: In Zendesk, navigate to Admin Center > Objects and rules > Tickets > Fields > Add field. Use the text field option and give the field a name such as “Slack thread ID”. Save the field. In n8n, open the Update ticket node and select the field you created in Zendesk.

Use Case This workflow is beneficial when you're automatically adding new leads to your Pipedrive CRM. Usually, you'd have to manually review each lead to determine if they're a good fit. This process is time-consuming and increases the chances of missing important leads. This workflow ensures every new lead is promptly evaluated upon addition. What this workflow does The workflow runs every 5 minutes. On every run, it checks your new Pipedrive leads and enriches them with Clearbit. It then marks items as enriched and checks if the company of the new lead matches certain criteria (in this case if they are B2B and have more than 100 employees) and sends a Slack alert to a channel for every match. Pre Conditions You must have Pipedrive, Clearbit, and Slack accounts. You also need to set up the custom fields Domain and Enriched at in Pipedrive. Setup Go to Company Settings -> Data fields -> Organization and add Domain as a custom field Go to Company Settings -> Data fields -> Leads and add Enriched at as a custom date field Add your Pipedrive, Clearbit and Slack credentials. Fill the setup node below. To get the ID of your custom domain fields, simply run the Show only custom organization fields and Show only custom lead fields nodes below and copy the keys of your domain, and enriched at fields. How to adjust this workflow to your needs Modify the criteria to suit your definition of an interesting lead. If you only want to focus on interesting leads in Pipedrive, add a node that archives all others. This workflow was built using n8n version 1.29.1