Back to Integrations
Microsoft Entra ID (Azure Active Directory)
Qualys
integrationMicrosoft Entra ID (Azure Active Directory) node
HTTP Request
integrationQualys node
HTTP Request

Microsoft Entra ID (Azure Active Directory) and Qualys integration

Save yourself the work of writing custom integrations for Microsoft Entra ID (Azure Active Directory) and Qualys and use n8n instead. Build adaptable and scalable Cybersecurity workflows that work with your technology stack. All within a building experience you will love.

Get started
See n8n in action

How to connect Microsoft Entra ID (Azure Active Directory) and Qualys

  • Step 1: Create a new workflow
  • Step 2: Add and configure nodes
  • Step 3: Connect
  • Step 4: Customize and extend your integration
  • Step 5: Test and activate your workflow

Step 1: Create a new workflow and add the first step

In n8n, click the "Add workflow" button in the Workflows tab to create a new workflow. Add the starting point – a trigger on when your workflow should run: an app event, a schedule, a webhook call, another workflow, an AI chat, or a manual trigger. Sometimes, the HTTP Request node might already serve as your starting point.

Microsoft Entra ID (Azure Active Directory) and Qualys integration: Create a new workflow and add the first step

Step 2: Add and configure Microsoft Entra ID (Azure Active Directory) and Qualys nodes using the HTTP Request nodes

You can find Microsoft Entra ID (Azure Active Directory) and Qualys nodes in the nodes panel and drag them onto your workflow canvas. These nodes will be added as HTTP Request nodes with pre-configured credential types. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) and Qualys. Configure Microsoft Entra ID (Azure Active Directory) and Qualys nodes one by one: input data on the left, parameters in the middle, and output data on the right.

Microsoft Entra ID (Azure Active Directory) and Qualys integration: Add and configure Microsoft Entra ID (Azure Active Directory) and Qualys nodes using the HTTP Request nodes

Step 3: Connect Microsoft Entra ID (Azure Active Directory) and Qualys

A connection establishes a link between Microsoft Entra ID (Azure Active Directory) and Qualys (or vice versa) to route data through the workflow. Data flows from the output of one node to the input of another. You can have single or multiple connections for each node.

Microsoft Entra ID (Azure Active Directory) and Qualys integration: Connect Microsoft Entra ID (Azure Active Directory) and Qualys

Step 4: Customize and extend your Microsoft Entra ID (Azure Active Directory) and Qualys integration

Use n8n's core nodes such as If, Split Out, Merge, and others to transform and manipulate data. Write custom JavaScript or Python in the Code node and run it as a step in your workflow. Connect Microsoft Entra ID (Azure Active Directory) and Qualys with any of n8n’s 1000+ integrations, and incorporate advanced AI logic into your workflows.

Microsoft Entra ID (Azure Active Directory) and Qualys integration: Customize and extend your Microsoft Entra ID (Azure Active Directory) and Qualys integration

Step 5: Test and activate your Microsoft Entra ID (Azure Active Directory) and Qualys workflow

Save and run the workflow to see if everything works as expected. Based on your configuration, data should flow from Microsoft Entra ID (Azure Active Directory) and Qualys or vice versa. Easily debug your workflow: you can check past executions to isolate and fix the mistake. Once you've tested everything, make sure to save your workflow and activate it.

Microsoft Entra ID (Azure Active Directory) and Qualys integration: Test and activate your Microsoft Entra ID (Azure Active Directory) and Qualys workflow

Build your own Microsoft Entra ID (Azure Active Directory) and Qualys integration

Create custom Microsoft Entra ID (Azure Active Directory) and Qualys workflows by choosing triggers and actions. Nodes come with global operations and settings, as well as app-specific parameters that can be configured. You can also use the HTTP Request node to query data from any app or service with a REST API.

Supported API Endpoints for Microsoft Entra ID (Azure Active Directory)

  • Users
  • Groups
  • Applications
  • Groups Members
List Users
Retrieve a list of user objects.
GET
/users
Create User
Create a new user.
POST
/users
Get User
Retrieve the properties and relationships of user object.
GET
/users/{userId}
Update User
Update the properties of a user object.
PATCH
/users/{userId}
Delete User
Delete a user.
DELETE
/users/{userId}

To set up Microsoft Entra ID (Azure Active Directory) integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) to query the data you need using the URLs you provide.

See the example here

Take a look at the Microsoft Entra ID (Azure Active Directory) official documentation to get a full list of all API endpoints

List Groups
Retrieve a list of group objects.
GET
/groups
Create Group
Create a new group.
POST
/groups
Get Group
Retrieve the properties and relationships of a group object.
GET
/groups/{groupId}
Update Group
Update the properties of a group object.
PATCH
/groups/{groupId}
Delete Group
Delete a group.
DELETE
/groups/{groupId}

To set up Microsoft Entra ID (Azure Active Directory) integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) to query the data you need using the URLs you provide.

See the example here

Take a look at the Microsoft Entra ID (Azure Active Directory) official documentation to get a full list of all API endpoints

List Applications
Retrieve a list of application objects.
GET
/applications
Create Application
Create a new application.
POST
/applications
Get Application
Retrieve the properties and relationships of an application object.
GET
/applications/{applicationId}
Update Application
Update the properties of an application object.
PATCH
/applications/{applicationId}
Delete Application
Delete an application.
DELETE
/applications/{applicationId}

To set up Microsoft Entra ID (Azure Active Directory) integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) to query the data you need using the URLs you provide.

See the example here

Take a look at the Microsoft Entra ID (Azure Active Directory) official documentation to get a full list of all API endpoints

List Group Members
Retrieve a list of the members of a group.
GET
/groups/{groupId}/members
Add Group Member
Add a member to a group.
POST
/groups/{groupId}/members/$ref
Get Group Member
Retrieve a member of a group.
GET
/groups/{groupId}/members/{memberId}
Remove Group Member
Remove a member from a group.
DELETE
/groups/{groupId}/members/{memberId}/$ref
Update Group Member
Update the properties of a group member.
PATCH
/groups/{groupId}/members/{memberId}

To set up Microsoft Entra ID (Azure Active Directory) integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) to query the data you need using the URLs you provide.

See the example here

Take a look at the Microsoft Entra ID (Azure Active Directory) official documentation to get a full list of all API endpoints

Supported API Endpoints for Qualys

  • Assets
  • Scans
  • Reports
  • Policies
List Assets
Fetches a list of all assets.
GET
/api/2.0/fo/asset/host/
Create Asset
Creates a new asset.
POST
/api/2.0/fo/asset/host/
Get Asset
Fetches details of a specific asset by ID.
GET
/api/2.0/fo/asset/host/{assetId}
Update Asset
Updates a specific asset by ID.
PUT
/api/2.0/fo/asset/host/{assetId}
Delete Asset
Deletes a specific asset by ID.
DELETE
/api/2.0/fo/asset/host/{assetId}

To set up Qualys integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Qualys to query the data you need using the URLs you provide.

See the example here

Take a look at the Qualys official documentation to get a full list of all API endpoints

List Scans
Fetches a list of all scans.
GET
/api/2.0/fo/scan/
Launch Scan
Launches a new scan.
POST
/api/2.0/fo/scan/
Get Scan
Fetches details of a specific scan by ID.
GET
/api/2.0/fo/scan/{scanId}
Update Scan
Updates a specific scan by ID.
PUT
/api/2.0/fo/scan/{scanId}
Delete Scan
Deletes a specific scan by ID.
DELETE
/api/2.0/fo/scan/{scanId}

To set up Qualys integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Qualys to query the data you need using the URLs you provide.

See the example here

Take a look at the Qualys official documentation to get a full list of all API endpoints

List Reports
Fetches a list of all reports.
GET
/api/2.0/fo/report/
Generate Report
Generates a new report.
POST
/api/2.0/fo/report/
Get Report
Fetches details of a specific report by ID.
GET
/api/2.0/fo/report/{reportId}
Update Report
Updates a specific report by ID.
PUT
/api/2.0/fo/report/{reportId}
Delete Report
Deletes a specific report by ID.
DELETE
/api/2.0/fo/report/{reportId}

To set up Qualys integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Qualys to query the data you need using the URLs you provide.

See the example here

Take a look at the Qualys official documentation to get a full list of all API endpoints

List Policies
Fetches a list of all policies.
GET
/api/2.0/fo/policy/
Create Policy
Creates a new policy.
POST
/api/2.0/fo/policy/
Get Policy
Fetches details of a specific policy by ID.
GET
/api/2.0/fo/policy/{policyId}
Update Policy
Updates a specific policy by ID.
PUT
/api/2.0/fo/policy/{policyId}
Delete Policy
Deletes a specific policy by ID.
DELETE
/api/2.0/fo/policy/{policyId}

To set up Qualys integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Qualys to query the data you need using the URLs you provide.

See the example here

Take a look at the Qualys official documentation to get a full list of all API endpoints

Microsoft Entra ID (Azure Active Directory) and Qualys integration details

integrationMicrosoft Entra ID (Azure Active Directory) node
HTTP Request
Microsoft Entra ID (Azure Active Directory)

Azure Active Directory (Azure AD) is Microsoft's cloud-based identity and access management service. It provides secure authentication and authorization for users, enabling them to access applications, resources, and services in the Azure cloud and other integrated applications.

integrationQualys node
HTTP Request
Qualys

Qualys is a cybersecurity company offering cloud-based solutions for vulnerability management, security and compliance. Its software scans and assesses an organization's IT infrastructure to identify vulnerabilities and ensure compliance with security standards, helping businesses protect their systems and data.

Use case

The SOAR platform you want

Mountains of monotonous tasks make building and monitoring your workflows a chore. Not anymore.

Learn more

FAQs

  • Can Microsoft Entra ID (Azure Active Directory) connect with Qualys?

  • Can I use Microsoft Entra ID (Azure Active Directory)’s API with n8n?

  • Can I use Qualys’s API with n8n?

  • Is n8n secure for integrating Microsoft Entra ID (Azure Active Directory) and Qualys?

  • How to get started with Microsoft Entra ID (Azure Active Directory) and Qualys integration in n8n.io?

Looking to integrate Microsoft Entra ID (Azure Active Directory) and Qualys in your company?

Contact Sales

Over 3000 companies switch to n8n every single week

Why use n8n to integrate Microsoft Entra ID (Azure Active Directory) with Qualys

Build complex workflows, really fast

Build complex workflows, really fast

Handle branching, merging and iteration easily.
Pause your workflow to wait for external events.

Code when you need it, UI when you don't

Simple debugging

Your data is displayed alongside your settings, making edge cases easy to track down.

Use templates to get started fast

Use 1000+ workflow templates available from our core team and our community.

Reuse your work

Copy and paste, easily import and export workflows.

Implement complex processes faster with n8n

Get started
red iconyellow iconred iconyellow icon

Automate without limits

Made with ♥ in Berlin
Impressum | Legal | Privacy

Report a vulnerability
© 2024 n8n | All rights reserved.