Back to Integrations
Microsoft Entra ID (Azure Active Directory)
VirusTotal
integrationMicrosoft Entra ID (Azure Active Directory) node
HTTP Request
integrationVirusTotal node
HTTP Request

Microsoft Entra ID (Azure Active Directory) and VirusTotal integration

Save yourself the work of writing custom integrations for Microsoft Entra ID (Azure Active Directory) and VirusTotal and use n8n instead. Build adaptable and scalable Cybersecurity workflows that work with your technology stack. All within a building experience you will love.

Get started
See n8n in action

How to connect Microsoft Entra ID (Azure Active Directory) and VirusTotal

  • Step 1: Create a new workflow
  • Step 2: Add and configure nodes
  • Step 3: Connect
  • Step 4: Customize and extend your integration
  • Step 5: Test and activate your workflow

Step 1: Create a new workflow and add the first step

In n8n, click the "Add workflow" button in the Workflows tab to create a new workflow. Add the starting point – a trigger on when your workflow should run: an app event, a schedule, a webhook call, another workflow, an AI chat, or a manual trigger. Sometimes, the HTTP Request node might already serve as your starting point.

Microsoft Entra ID (Azure Active Directory) and VirusTotal integration: Create a new workflow and add the first step

Step 2: Add and configure Microsoft Entra ID (Azure Active Directory) and VirusTotal nodes using the HTTP Request nodes

You can find Microsoft Entra ID (Azure Active Directory) and VirusTotal nodes in the nodes panel and drag them onto your workflow canvas. These nodes will be added as HTTP Request nodes with pre-configured credential types. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) and VirusTotal. Configure Microsoft Entra ID (Azure Active Directory) and VirusTotal nodes one by one: input data on the left, parameters in the middle, and output data on the right.

Microsoft Entra ID (Azure Active Directory) and VirusTotal integration: Add and configure Microsoft Entra ID (Azure Active Directory) and VirusTotal nodes using the HTTP Request nodes

Step 3: Connect Microsoft Entra ID (Azure Active Directory) and VirusTotal

A connection establishes a link between Microsoft Entra ID (Azure Active Directory) and VirusTotal (or vice versa) to route data through the workflow. Data flows from the output of one node to the input of another. You can have single or multiple connections for each node.

Microsoft Entra ID (Azure Active Directory) and VirusTotal integration: Connect Microsoft Entra ID (Azure Active Directory) and VirusTotal

Step 4: Customize and extend your Microsoft Entra ID (Azure Active Directory) and VirusTotal integration

Use n8n's core nodes such as If, Split Out, Merge, and others to transform and manipulate data. Write custom JavaScript or Python in the Code node and run it as a step in your workflow. Connect Microsoft Entra ID (Azure Active Directory) and VirusTotal with any of n8n’s 1000+ integrations, and incorporate advanced AI logic into your workflows.

Microsoft Entra ID (Azure Active Directory) and VirusTotal integration: Customize and extend your Microsoft Entra ID (Azure Active Directory) and VirusTotal integration

Step 5: Test and activate your Microsoft Entra ID (Azure Active Directory) and VirusTotal workflow

Save and run the workflow to see if everything works as expected. Based on your configuration, data should flow from Microsoft Entra ID (Azure Active Directory) and VirusTotal or vice versa. Easily debug your workflow: you can check past executions to isolate and fix the mistake. Once you've tested everything, make sure to save your workflow and activate it.

Microsoft Entra ID (Azure Active Directory) and VirusTotal integration: Test and activate your Microsoft Entra ID (Azure Active Directory) and VirusTotal workflow

Build your own Microsoft Entra ID (Azure Active Directory) and VirusTotal integration

Create custom Microsoft Entra ID (Azure Active Directory) and VirusTotal workflows by choosing triggers and actions. Nodes come with global operations and settings, as well as app-specific parameters that can be configured. You can also use the HTTP Request node to query data from any app or service with a REST API.

Supported API Endpoints for Microsoft Entra ID (Azure Active Directory)

  • Users
  • Groups
  • Applications
  • Groups Members
List Users
Retrieve a list of user objects.
GET
/users
Create User
Create a new user.
POST
/users
Get User
Retrieve the properties and relationships of user object.
GET
/users/{userId}
Update User
Update the properties of a user object.
PATCH
/users/{userId}
Delete User
Delete a user.
DELETE
/users/{userId}

To set up Microsoft Entra ID (Azure Active Directory) integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) to query the data you need using the URLs you provide.

See the example here

Take a look at the Microsoft Entra ID (Azure Active Directory) official documentation to get a full list of all API endpoints

List Groups
Retrieve a list of group objects.
GET
/groups
Create Group
Create a new group.
POST
/groups
Get Group
Retrieve the properties and relationships of a group object.
GET
/groups/{groupId}
Update Group
Update the properties of a group object.
PATCH
/groups/{groupId}
Delete Group
Delete a group.
DELETE
/groups/{groupId}

To set up Microsoft Entra ID (Azure Active Directory) integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) to query the data you need using the URLs you provide.

See the example here

Take a look at the Microsoft Entra ID (Azure Active Directory) official documentation to get a full list of all API endpoints

List Applications
Retrieve a list of application objects.
GET
/applications
Create Application
Create a new application.
POST
/applications
Get Application
Retrieve the properties and relationships of an application object.
GET
/applications/{applicationId}
Update Application
Update the properties of an application object.
PATCH
/applications/{applicationId}
Delete Application
Delete an application.
DELETE
/applications/{applicationId}

To set up Microsoft Entra ID (Azure Active Directory) integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) to query the data you need using the URLs you provide.

See the example here

Take a look at the Microsoft Entra ID (Azure Active Directory) official documentation to get a full list of all API endpoints

List Group Members
Retrieve a list of the members of a group.
GET
/groups/{groupId}/members
Add Group Member
Add a member to a group.
POST
/groups/{groupId}/members/$ref
Get Group Member
Retrieve a member of a group.
GET
/groups/{groupId}/members/{memberId}
Remove Group Member
Remove a member from a group.
DELETE
/groups/{groupId}/members/{memberId}/$ref
Update Group Member
Update the properties of a group member.
PATCH
/groups/{groupId}/members/{memberId}

To set up Microsoft Entra ID (Azure Active Directory) integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to Microsoft Entra ID (Azure Active Directory) to query the data you need using the URLs you provide.

See the example here

Take a look at the Microsoft Entra ID (Azure Active Directory) official documentation to get a full list of all API endpoints

Supported API Endpoints for VirusTotal

  • Files
  • URLs
  • Domains
  • IP Addresses
GetFileReport
Retrieve the latest report on a file.
GET
/files/{file_id}
ScanFile
Send a file for scanning.
POST
/files
GetFileBehaviours
Retrieve a file's behaviors observed during sandbox execution.
GET
/files/{file_id}/behaviours
GetFileComments
Retrieve comments on a file.
GET
/files/{file_id}/comments
AddFileComment
Post a comment on a file.
POST
/files/{file_id}/comments

To set up VirusTotal integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to VirusTotal to query the data you need using the URLs you provide.

See the example here

Take a look at the VirusTotal official documentation to get a full list of all API endpoints

GetURLReport
Retrieve the latest report on a URL.
GET
/urls/{url_id}
ScanURL
Send a URL for scanning.
POST
/urls
GetURLComments
Retrieve comments on a URL.
GET
/urls/{url_id}/comments
AddURLComment
Post a comment on a URL.
POST
/urls/{url_id}/comments
GetURLVotes
Retrieve votes on a URL.
GET
/urls/{url_id}/votes

To set up VirusTotal integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to VirusTotal to query the data you need using the URLs you provide.

See the example here

Take a look at the VirusTotal official documentation to get a full list of all API endpoints

GetDomainReport
Retrieve the latest report on a domain.
GET
/domains/{domain}
GetDomainComments
Retrieve comments on a domain.
GET
/domains/{domain}/comments
AddDomainComment
Post a comment on a domain.
POST
/domains/{domain}/comments
GetDomainResolutions
Retrieve the resolutions of a domain.
GET
/domains/{domain}/resolutions
GetDomainSiblings
Retrieve the siblings of a domain.
GET
/domains/{domain}/siblings

To set up VirusTotal integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to VirusTotal to query the data you need using the URLs you provide.

See the example here

Take a look at the VirusTotal official documentation to get a full list of all API endpoints

GetIPAddressReport
Retrieve the latest report on an IP address.
GET
/ip_addresses/{ip_address}
GetIPAddressComments
Retrieve comments on an IP address.
GET
/ip_addresses/{ip_address}/comments
AddIPAddressComment
Post a comment on an IP address.
POST
/ip_addresses/{ip_address}/comments
GetIPAddressResolutions
Retrieve the resolutions of an IP address.
GET
/ip_addresses/{ip_address}/resolutions
GetIPAddressHistorical
Retrieve the historical data of an IP address.
GET
/ip_addresses/{ip_address}/historical

To set up VirusTotal integration, add the HTTP Request node to your workflow canvas and authenticate it using a predefined credential type. This allows you to perform custom operations, without additional authentication setup. The HTTP Request node makes custom API calls to VirusTotal to query the data you need using the URLs you provide.

See the example here

Take a look at the VirusTotal official documentation to get a full list of all API endpoints

Microsoft Entra ID (Azure Active Directory) and VirusTotal integration details

integrationMicrosoft Entra ID (Azure Active Directory) node
HTTP Request
Microsoft Entra ID (Azure Active Directory)

Azure Active Directory (Azure AD) is Microsoft's cloud-based identity and access management service. It provides secure authentication and authorization for users, enabling them to access applications, resources, and services in the Azure cloud and other integrated applications.

integrationVirusTotal node
HTTP Request
VirusTotal

VirusTotal is an online service owned by Google that analyzes files and URLs for malware and security threats. It aggregates antivirus scan results from multiple engines, providing users with a comprehensive assessment of potential threats, aiding in cybersecurity and threat intelligence efforts.

Use case

The SOAR platform you want

Mountains of monotonous tasks make building and monitoring your workflows a chore. Not anymore.

Learn more

FAQs

  • Can Microsoft Entra ID (Azure Active Directory) connect with VirusTotal?

  • Can I use Microsoft Entra ID (Azure Active Directory)’s API with n8n?

  • Can I use VirusTotal’s API with n8n?

  • Is n8n secure for integrating Microsoft Entra ID (Azure Active Directory) and VirusTotal?

  • How to get started with Microsoft Entra ID (Azure Active Directory) and VirusTotal integration in n8n.io?

Looking to integrate Microsoft Entra ID (Azure Active Directory) and VirusTotal in your company?

Contact Sales

Over 3000 companies switch to n8n every single week

Why use n8n to integrate Microsoft Entra ID (Azure Active Directory) with VirusTotal

Build complex workflows, really fast

Build complex workflows, really fast

Handle branching, merging and iteration easily.
Pause your workflow to wait for external events.

Code when you need it, UI when you don't

Simple debugging

Your data is displayed alongside your settings, making edge cases easy to track down.

Use templates to get started fast

Use 1000+ workflow templates available from our core team and our community.

Reuse your work

Copy and paste, easily import and export workflows.

Implement complex processes faster with n8n

Get started
red iconyellow iconred iconyellow icon

Automate without limits

Made with ♥ in Berlin
Impressum | Legal | Privacy

Report a vulnerability
© 2024 n8n | All rights reserved.