Integrate Execute Command with 500+ apps and services

This creates a git backup of the workflows and credentials. It uses the n8n export command with git diff, so you can run as many times as you want, but only when there are changes they will create a commit. Setup You need some access to the server. Create a repository in some remote place to host your project, like Github, Gitlab, or your favorite private repo. Clone the repository in the server in a place that the n8n has access. In the example, it's the ., and the repository name is repo. Change it in the commands and in the workflow commands (you can set it as a variable in the wokflow). Checkout to another branch if you won't use the master one. cd . git clone repository Or you could git init and then add the remote (git remote add origin YOUR_REPO_URL), whatever pleases you more. As the server, check if everything is ok for beeing able to commit. Very likely you'll need to setup the user email and name. Try to create a commit, and push it to upstream, and everything you need (like config a user to comit) will appear in way. I strong suggest testing with exporting the commands to garantee it will work too. cd ./repo git commit -c "Initial commmit" --allow-empty -u is the same as --set-upstream git push -u origin master Testing to push to upstream with the first exported data npx n8n export:workflow --backup --output ./repo/workflows/ npx n8n export:credentials --backup --output repo/credentials/ cd ./repo git add . git commit -c "manual backup: first export" git push After that, if everything is ok, the workflow should work just fine. Adjustments Adjust the path in used in the workflow. See the the git -C PATH command is the same as cd PATH; git .... Also, adjust the cron to run as you need. As I said in the beginning, you can run it even for every minute, but it will create commits only when there are changes. Credentials encryption The default for exporting the credentials is to do them encrypted. You can add the flag --decrypted to the n8n export:credentials command if you need to save them in plain. But as general rule, it's better to save the encryption key, that you only need to do that once, and them export it safely encrypted.

This workflow allows extracting data from multiple pages website. The workflow: 1) Starts in a country list at https://www.theswiftcodes.com/browse-by-country/. 2) Loads every country page (https://www.theswiftcodes.com/albania/) 3) Paginates every page in the country page. 4) Extracts data from the country page. 5) Saves data to MongoDB. 6) Paginates through all pages in all countries. It uses getWorkflowStaticData('global') method to recover the next page (saved from the previous page), and it goes ahead with all the pages. There is a first section where the countries list is recovered and extracted. Later, I try to read if a local cache page is available and I recover the cached page from the disk. Finally, I save data to MongoDB, and we paginate all the pages in the country and for all the countries. I have applied a cache system to save a visited page to n8n local disk. If I relaunch workflow, we check if a cache file exists to discard non-required requests to the webpage. If the data present in the website changes, you can apply a Cron node to check the website once per week. Finally, before inserting data in MongoDB, the best way to avoid duplicates is to check that swift_code (the primary value of the collection) doesn't exist. I recommend using a proxy for all requests to avoid IP blocks. A good solution for proxy plus IP rotation is scrapoxy.io. This workflow is perfect for small data requirements. If you need to scrape dynamic data, you can use a Headless browser or any other service. If you want to scrape huge lists of URIs, I recommend using Scrapy + Scrapoxy.

Este workflow es para trabajar con tratamiento de texto usando n8n y poder iniciarte en como funciona. How To, Paso a Paso: https://comunidad-n8n.com/tratamiento-de-textos/ Comunidad de telegram: https://t.me/comunidadn8n

Purpose This workflow allows you to transfer credentials from one n8n instance to another. How it works A multi-form setup guides you through the entire process You get to choose one of your predefined (in the Settings node) remote instances first Then all credentials of the current instance are being retrieved using the Execute Command node On the next form page you can select one of the credentials by their name and initiate the transfer Finally the credential is being created on the remote instance using the n8n API. A final form ending indicates if that action succeeded or not. Setup Select your credentials in the nodes which require those Configure your remote instance(s) in the Settings node Every instance is defined as object with the keys name, apiKey and baseUrl. Those instances are then wrapped inside an array. You can find an example described within a note on the workflow canvas. How to use Grab the (production) URL of the Form from the first node Open the URL and follow the instructions given in the multi-form Disclaimer Please note, that this workflow can only run on self-hosted n8n instances, since it requires the Execute Command Node. Security: Beware, that all credentials are being decrypted and processed within the workflow. Also the API keys to other n8n instances are stored within the workflow. This solution is primarily meant for transferring data between testing environments. For production use consider the n8n enterprise edition which provides a reliable way to manage credentials across different environments.

Based on Jonathan's work. Check out his templates. This workflow will backup your credentials to GitHub. It uses a CLI command to export all credentials. It then loops over the data, checks in GitHub to see if a file exists that uses the credential's ID. Once checked it will: update the file on GitHub if it exists; create a new file if it doesn't exist; ignore if it's the same. Config Options repo.owner - Github owner repo.name - Github repository name repo.path - Path within the Github repository ⚠ The credentials are all decrypted. Make sure you save them safely or tweak the CLI command to store them encrypted.== Check out my other templates 👉 https://n8n.io/creators/solomon/

If you have a shared or personal drive location with a high frequency of files created by humans, it can become difficult to organise. This may not matter... until you need to search for something! This n8n workflow works with the local filesystem to target the messy folder and categorise as well as organise its files into sub directories automatically. Disclaimer Unfortunately due to the intended use-case, this workflow will not work on n8n Cloud and a self-hosted version of n8n is required. How it works Uses the local file trigger to activate once a new file is introduced to the directory The new file's filename and filetype are analysed using AI to determine the best location to move this file. The AI assess the current subdirectories as to not create duplicates. If a relevant subdirectory is not found, a new subdirectory is suggested. Finally, an Execute Command node uses the AI's suggestions to move the new file into the correct location. Requirements Self-hosted version of n8n. The nodes used in this workflow only work in the self-hosted version. If you are using docker, you must create a bind mount to a host directory. Mistral.ai account for LLM model Customise this workflow If the frequency of files created is high enough, you may not want the trigger to active on every new file created event. Switch to a timer to avoid concurrency issues. Want to go fully local? A version of this workflow is available which uses Ollama instead. You can download this template here: https://drive.google.com/file/d/1iqJ_zCGussXpfaUBYGrN5opziEFAEQMu/view?usp=sharing

This workflow extends n8n and uses R language graphic capabilities. This is a Telegram bot which fetches weather data via the openweathermap.org API, plots an image using ggoplot2 package from R and sends the image to the Telegram user.

Purpose This workflow allows you to import any workflow from a file or another n8n instance and map the credentials easily. How it works A multi-form setup guides you through the entire process At the beginning you have two options: Upload a workflow file (JSON) Copy workflow from a remote n8n instance If you choose the second option, you get to choose one of your predefined (in the Settings node) remote instances first, then it retrieves a list of all the workflows using the n8n API which you then can choose a workflow from. Now both initial options come together - the workflow file is being processed In parallel all credentials of the current instance are being retrieved using the Execute Command node The next form page enables a mapping of all the credentials used in the workflow. The matching happens between the names (because one workflow can contain different credentials of the same type) of the original credentials and the ones available on the current instance. Every option then shows all available credentials of the same type. In addition the user has always the choice to create a new credential on the fly. For every option which was set to create a new credential, an empty credential is being created on the current instance using the n8n API. An emoji is being appended to the name, which indicates that it needs to be populated. Finally the workflow gets updated with the new credential ID’s and created on the current instance using the n8n API. Then the user gets a message, if the process has succeeded or not. Setup Select your credentials in the nodes which require those Configure your remote instance(s) in the Settings node. (You can skip this step, if you only want to use the File Upload feature) Every instance is defined as object with the keys name, apiKey and baseUrl. Those instances are then wrapped inside an array. You can find an example described within a note on the workflow canvas. How to use Grab the (production) URL of the Form from the first node Open the URL and follow the instructions given in the multi-form Disclaimer Security: Beware, that all credentials are being decrypted and processed within the workflow. Also the API keys to other n8n instances are stored within the workflow. This solution is primarily meant for transferring data between testing environments. For production use consider the n8n enterprise edition which provides a reliable way to deploy workflows between different environments without the need of manual credential mapping.